Huawei S5730-EI switch, 48 x Ethernet 10/100/1,000 ports,PoE, 8 x 10 Gig SFP+

S5730S-68C-PWR-EI Specification

• Using 500 W AC or 1000 W AC power modules: ±6 kV in differential mode, ±6 kV in common mode
• Using 650 W DC or 1150 W AC power modules: ±2 kV in differential mode, ±4 kV in common mode

• Basic dimensions (excluding the parts protruding from the body): 44.4 mm x 442.0 mm x 425.0 mm (1.75 in. x 17.4 in. x 16.73 in.)
• Maximum dimensions (the depth is the distance from ports on the front panel to the handle on the rear panel): 44.4 mm x 442.0 mm x 451.3 mm (1.75 in. x 17.4 in. x 17.77 in.)

When 1150 W power modules are installed, they stretch out from the chassis. Therefore, the total depth of the switch changes to 541.1 mm (21.3 in.).

Ports on the 2-port QSFP+ rear stack card

-48 V DC to -60 V DC

-38.4 V DC to -72 V DC

• Using 650 W DC or 500 W AC power modules
  • Not providing the PoE function: 68.3 W (without card)
  • 100% PoE loads: 925 W (system power consumption: 185.8 W, PoE: 739.2 W, without card)
• Using 1150 W AC or 1000 W AC power modules
  • Not providing the PoE function: 68.3 W (without card)
  • 100% PoE loads: 1733 W (system power consumption: 293 W, PoE: 1440 W, without card)

• Tested according to ATIS standard
• EEE enabled
• No PoE power consumption

NOTE:

When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).

The operating temperature of the switch is 0°C to 40°C (32°F to 104°F) when it uses QSFP+ optical modules with 10 km or longer transmission distances.

NOTE:

When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).

The equipment can operate beyond the normal operating temperature range for a short-term period, but the following conditions must be met:

• The equipment operates at a temperature of over 45°C (113°F) consecutively for at most 96 hours in one year.
• The equipment operates at a temperature of over 45°C (113°F) for a total of no more than 360 hours in one year.
• The equipment operates at a temperature of over 45°C (113°F) for no more in 15 times in one year.

The equipment may be damaged or experience unexpected exceptions if any of the preceding limits is exceeded.

The equipment cannot start when the temperature is lower than 0°C (32°F). The maximum distance of optical modules used in these conditions cannot exceed 10 km.

• EMC certification
• Safety certification
• Manufacturing certification